Should Transportation Systems Be Public Or Private?

In light of the recent sequester in Washington, I thought it might be interesting to think a little about the relationship between transportation systems and public policy. To what extent should the government manage and fund the design, operation, and maintenance of transportation systems? In one sense, it is a very philosophical topic, but it is also inescapably tied to the practical.

Let’s be clear right up front. I think many people, myself included, often fall into believing the idea that “private transportation system” means “cars” while “public transportation system” means “trains and subways.” This is not correct. For example, although the cars themselves are privately owned, the interstate highway system is most definitely a public roadway network, while much of the tracks that make up the Northeast Corridor are owned by the private, albeit heavily subsidized, company Amtrak.

The very nature of Amtrak as a publically-funded, for-profit corporation brings to light another interesting fact related to our topic – namely that in the vast majority of cases, transportation systems are not strictly “public” or “private,” but rather some combination of the two. The question, then, is truly not, “Should the government be involved in the transportation sector?”, but rather, “To what extent should the government be involved in the transportation sector?” What role should the government play? What should be its responsibilities? Hard to definitively answer – but interesting to think about.

The question of public vs. private is especially interesting due to recent events in Washington. Congress, along with the American people as a whole, is very much divided on the issue of the role of government, especially in the areas of economic and fiscal policy. As alluded to above, the recent standoff between conservatives and liberals regarding government spending and taxation lead to the budget cuts known as the sequester. In addition, as one ASCE blogger points out, “Congress will need to pass another continuing resolution (CR) before March 27 to keep the federal government funded.” Although this bill will almost certainly be passed, it is unclear what provisions it will contain with regard to new or maintained government spending on transportation. On top of all this, the federal government is expected to reach its debt ceiling (again!) by May of this year.

What does all of this have to do with transportation systems? Very simply, it takes a lot of money to construct and maintain a transportation system. At this point in time, the US federal government does not have a lot of money to spend on, well, anything really.

So we’re confronted with this problem, and several solutions present themselves.

  • Option 1: Enlarge the role of the federal government. Increase centralized planning, raise taxes, and encourage certain modes of transportation over others as a way to shape the future of the transportation system.
  • Option 2: Give the states more power over their respective transportation systems. (Note: This is similar to our current system.) Or, go even further and give more power to local authorities.
  • Option 3: Privatize the transportation system. Encourage companies to construct new infrastructure or take over responsibility for existing infrastructure using financial incentives or by decreasing existing regulations.
  • Option 4: Push Public-Private Partnerships. Invest in the development of a publically-subsidized, privately-run transportation system. The degree of privatization can vary to meet the needs of the area.

Each of these options has pro’s and con’s. In general, they are tied to the two extremes of entirely public vs. fully private.

An entirely public system gets its strength from its centralization. The government has (at least the potential for) more capital than private firms, and can therefore invest in large projects designed to meet future needs. In addition, it can more easily obtain the land needed for a project through the use of eminent domain. The government can also plan a uniform system for a large area, and is more able to plan around needs, rather than practically limiting constraints.

Despite all of its advantages, public systems have their fair share of problems. Government-managed programs are notoriously slow and not especially cost-effective. Because of the high levels of bureaucracy often present in government projects and the lack of financial pressure, there is often a lack of challenging, defined goals, insightful and revolutionary ideas, and visionary leadership. In a sense, too much oversight breeds a lack of effective oversight.

Private systems have their own challenges and drawbacks. Transportation systems, by their nature, call for extensive organizational and technological unity. If a transportation system is too decentralized, without any major players, it cannot adequately perform its primary function of effectively moving people and goods from point to point. For example, think of medieval Germany, where a trip up the Rhine involved stopping every few miles to pay a toll to some feudal lord (robber baron) in return for the right to pass through his section of river. Or, consider the many cases in which two transportation systems are geographically very close, but not connected due to poor planning and a lack of oversight. Increased financial concerns also mean that private companies may be hesitant to take on projects that are necessary to society, but may not be able to generate enough revenue to be self-sustaining or profitable. In addition, critics suggest that lack of government oversight may result in the endangerment of public welfare due to the implementation of cost-cutting measures.

Despite these drawbacks, private systems have a host of advantages over public ones. A private company’s efficiency in managing financial resources, manpower, and project time-scales is probably the greatest advantage of such an enterprise over its public counterpart. In addition, although the government has vast resources available to it for large-scale planning, private firms are generally more in-tune to the actual needs of society because they closely monitor the market, which is a rather good indicator of society’s needs and/or wants. While the government may have “experts” that can make recommendations (be they good or not) about what will be good for society as a whole and in the long run, for-profit companies do an excellent job at determining what society wants, and meeting that desire. Plus, as an added bonus, taxes decrease.

In many cases, the best option is to blend the two extremes of public and private. The exact organization can be determined on a case-by-case basis in order to maximize the benefits of each, while avoiding the drawbacks. Public-Private Partnerships may take a variety of forms. The system organization used perhaps most commonly in the US features government-subsidized companies responsible for system maintenance and operation. For example, many train, subway, and bus systems are operated by heavily-subsidized for-profit companies. However, in other cases, political opposition prevents the implementation of such systems. For example, efforts to turn control of the Pennsylvania Turnpike over to a private company failed when it was revealed that the company being considered (because it had the most competitive bid) was foreign-based.

All told, the question of public vs. private is not an easy one. Many complex factors are involved, both practical and philosophical. However, it is a question that demands an answer one way or another. If no answer is intentionally and specifically given by society, the government, and private companies, the result will be the continuation of the status quo. Fortunately, in our society, we as citizens and consumers have a say in deciding the future of our transportation system. So, if you want to change something, work to make it happen.






1,347 thoughts on “Should Transportation Systems Be Public Or Private?

    • >How many solar panels can be connected to one Solar Charge Controller. You will find this information in the user manual when you purchase a solar charge controller. In general, the maximum power of the PV means the largest panel you can connect to the charge controller. Pure sine wave inverters come in different forms and capacities to provide different efficiencies. Therefore, the efficiency of the inverter must be considered before purchasing an inverter.

    • At powmr, we are proud of our network of over 100 corporate service centers and nearly 190 authorized service points. With more than 1,400 field professionals serving more than 4,200 locations worldwide, we provide efficient power solutions for all your needs. But what are they and what do they do? Read on to find out why you need one to power your gadget on the road. Interestingly, power inverter are also now becoming more common in home air conditioning units.

  1. شرکت آهن‌ رسان مشهد با بیش از 3 دهه تجربه مدیران آن، در زمینه تأمین انواع مقاطع فولادی برای مصرف‌کنندگان در صنایع ساخت‌وساز، خودروسازی، کارگاه‌ها و کارخانه های تولیدات صنعتی و… خدمات خود را ارائه می دهد. آهن رسان با شعار مشتری مداری و حفظ کیفیت، به همراه گروهی منسجم از نیروی کار حرفه‌ای با دانش تخصصی بستر مناسبی را برای مشاوره و انجام معاملات در زمینه خریدوفروش آهن‌آلات فراهم کرده است.

  2. میلگرد یکی از رایج‌ترین مقاطع فولادی است. بیش‌ترین کاربرد میلگردها در معماری و ساخت و ساز است. دلیل اصلی این کاربرد افزایش مقاومت کششی و خمشی بتن است، زیرا با وجود این که بتن مقاومت بسیار عالی در برابر فشار و تحمل بار دارد، ‌اما از نظر کششی انعطاف زیادی نداشته و در صورت ایجاد فشار یا ضربات ناگهانی، امکان شکستگی یا ترک برداشتن آن بالا است. قرار گرفتن میلگرد در بتن باعث جبران این ضعف می‌شود. میلگردها خود در انواع گوناگونی وجود دارند که با توجه به تفاوت‌هایشان، جهت کاربردهای مختلفی هم استفاده می‌شوند. این تفاوت‌ها هم شامل شکل و ظاهر میلگرد بوده و هم ویژگی‌های دیگر مانند ضخامت، کشش و استحکام آن‌ها را در بر می‌گیرد.

  3. The first downside is “Yes, you can travel by public transportation, but public transportation allows you to travel.” Bus routes do not travel anywhere and the same goes for LRT lines and some taxis. For the most part, you have to walk to where you really need it.

  4. Hi! This is my first visit to your blog! We are a team of volunteers and new initiatives in the same niche. Blog gave us useful information to work. You have done an amazing job! 메이저토토사이트 Thank you very much. Can I refer to your post on my website? Your post touched me a lot and helped me a lot. If you have any questions, please visit my site and read what kind of posts I am posting. I am sure it will be interesting.

  5. >a href=”” >پد سلولزی ماینر به مانند هر نوع دیگری از این واسط های مدرن تبخیری را از کاغذ کرافت می سازند. لایه های شیاردار کاغذ کرافت بر روی هم قرار می‌ گیرند تا در مجموع یک صفحه بزرگ و متخلخل را ایجاد کنند. کاغذ کرافت نوعی الیاف است که قابلیت بالایی در جذب آب دارد و در عین حال همراه با حضور آب فرسوده و یا خراب نمی شود. الگوی طراحی تا کارکرد انواع پد سلولزی درست شبیه به واسط تبخیری های کلاسیک از مدل های پوشالی است. در این حالت قرار است آب را در سطح واسط تبخیری که حالا پد سلولزی ماینر است، جاری ساخته و به یک جریان یکنواخت از سطح بزرگی از آب که در مقابل هوای گرم قرار خواهد گرفت، دست پیدا خواهیم کرد.

  6. Büyü tarihin her döneminde var olan, bazen iyi niyetli bazen de kötü niyetli olarak yapılan bir işlemdir. Büyüyü yapan kişinin kendinden emin olması ve bu büyüyü daha önceden yapmış olması gerekir. Çünkü büyü yapmak acemice yapılabilecek bir şey değildir. Büyü sıradan insanların işi değildir. Büyü yapan medyum kişinin de bu konuda yeteneğinin olması gerekir. Yetenek doğuştan kendisine verilmiştir. El alma olarak da bilinen medyumluk doğuştan gelen yeteneğin fark edilmesi ve bunun geliştirilmesiyle başlar. Medyum Faruk hoca ise medyumlar arasından ismini duyurmayı başarmış, bazen ayırma büyüsüyle bazen de aşık etme duasıyla adından çok fazla söz ettirmiştir.

    Kaynak :

  7. Bir şekilde sanal dünyada kendimizi kanıtlamaya çalışıyor,ancak herkesin de bunu yapabildiğini söyleyemeyiz. Önceliğimiz her zaman başarıdan yana olmak zorundadır ve denemek başarmanın yarısı olmalıdır. Dijital platformlarda tüm işlemlerinizin planlı olması gerekiyor ve bizde influencer ajansı olarak insanların ve kurumların bunu nasıl yapması gerektiği hususunda detaylara yöneliyoruz. Etkileyici bir pazarlama yöntemi olan influencer mesleği giderek daha fazla büyümeye ve daha fazla kişi tarafından talep edilmeye başlandı.

  8. همه ما می دانیم که معمولا در کار لوله بازکنی کثیف کاری وجود دارد، اما می توان با انتخاب بهترین شرکت ارائه دهنده خدمات و با رعایت بهداشت توسط سرویسکاران ایشان این کثیف کاری را به حداقل رساند.
    شرکت آقای لوله بازکن با تکیه بر تخصص و تجربه لوله بازکن های خود و همچنین با استفاده از دستگاههای بروز و پیشرفته مانند فنر برقی سرویس لوله بازکنی جمهوری را با کمترین میزان کثیف کاری انجام می دهد .

  9. As it is known, IKEA adopts a professional presentation tactic with its items in the correct order and placed at the moment of entering the store until the exit. This is a strong reflection of the marketing technique.

    IKEA prioritizes the quality of the products it serves in its stores. Therefore, it adopts a strong cooperation with the right partners. Naturally, it supports product quality with long-term warranty options. The product description of each product is detailed. The person can easily obtain all the information about the product from the product description.

    Reference :

  10. دستگاه فیدر چیست ؟
    کلمه فیدر در معنای لغوی به معنی تغذیه کننده می‌ باشد. از این رو به دستگاهی که به منظور باردهی یا تغذیه دستگاه‌ های دیگری مانند سنگ شکن فکی، فیدر چیست سنگ شکن هیدروکن ،سایر سنگ شکن ها و یا مخلوط کن ها و یا دستگاه های پرس مورد استفاده قرار می گیرد، دستگاه فیدر می گویند. در واقع کار دستگاه فیدر آماده کردن مواد ورودی سایر دستگاه ها می باشد. دستگاه فیدر دارای استفاده های گوناگونی می باشد و بر اساس استفاده ای که از آن می شود، دارای انواع مختلفی می باشد.

Leave a Reply

Your email address will not be published. Required fields are marked *